Scientists at CeNS in Bengaluru have created a photo-rechargeable supercapacitor, known as a photo-capacitor, which simultaneously captures and stores solar energy, eliminating the need for separate solar panels and batteries. This innovative device enhances efficiency and compactness, paving the way for advanced, self-sustaining power systems in portable electronics and renewable energy use.

The post NiCo₂O₄ Nanowire Photo-Capacitor Enables Self-Charging Energy Storage appeared first on SolarQuarter.

Energy storage owner-operator BW ESS has submitted an application under Australia's Environment Protection and Biodiversity Conservation (EPBC) Act for a 1,600MWh battery energy storage system (BESS) in New South Wales (NSW).

Origin Energy has begun generating revenue from the initial stage of the Supernode and the Eraring Stage 1 battery storage projects, located in Queensland and New South Wales, Australia.

In Short : Telangana is planning a major transformation of its power sector by targeting a 50% green energy mix and expanding battery storage capacity as electricity demand is projected to exceed 100,000 MW by 2047. The strategy focuses on renewable integration, grid modernization, storage deployment, and sustainable infrastructure to ensure long-term energy security and economic growth.

In Detail : Telangana is preparing for a significant shift in its energy landscape as electricity demand in the state is expected to cross 100,000 MW by 2047. Rapid urbanization, industrial expansion, digital infrastructure growth, and rising living standards are driving a sharp increase in power consumption. To meet this demand sustainably, the state has outlined a long-term strategy centered on renewable energy and energy storage.

A key pillar of Telangana’s plan is achieving a 50% green power mix in its overall electricity portfolio. This involves scaling up solar, wind, and other renewable sources to reduce dependence on fossil fuels and minimize carbon emissions. The transition is aligned with national clean energy goals and reflects Telangana’s ambition to position itself as a leader in sustainable development.

Solar energy is expected to play a dominant role in this transition due to Telangana’s high solar potential and availability of land for large-scale projects. Rooftop solar, utility-scale solar parks, and solar integration in industrial and commercial zones are being promoted to decentralize generation and reduce transmission losses. Wind and hybrid renewable projects are also expected to complement solar generation.

As renewable energy penetration increases, grid stability becomes a critical challenge. Intermittent power generation from solar and wind creates variability that must be managed effectively. To address this, Telangana is planning significant investments in battery energy storage systems to balance supply and demand, ensure reliability, and support round-the-clock power availability.

Battery storage is being positioned as a strategic enabler of the green transition. Large-scale storage systems will allow excess renewable energy generated during peak periods to be stored and dispatched during high-demand or low-generation hours. This not only improves grid resilience but also reduces curtailment of renewable power and enhances overall system efficiency.

Grid modernization is another central component of the state’s energy roadmap. Upgrading transmission infrastructure, deploying smart grid technologies, and integrating digital monitoring systems will enable real-time demand management and efficient power distribution. These measures are essential for accommodating large volumes of distributed renewable energy and storage assets.

The expansion of green power and storage is also expected to have strong economic implications. It will attract private investment, create employment opportunities, and stimulate the growth of clean energy industries within the state. Manufacturing of solar equipment, batteries, and related technologies could emerge as new industrial clusters.

From a policy perspective, Telangana’s strategy requires coordinated planning between government agencies, utilities, regulators, and private developers. Supportive policies, long-term power purchase agreements, financial incentives, and regulatory reforms will be necessary to accelerate renewable deployment and make storage systems commercially viable.

Overall, Telangana’s vision of achieving a 50% green power mix with large-scale battery storage represents a forward-looking approach to energy planning. By proactively addressing future demand growth and sustainability challenges, the state is building a resilient, low-carbon power system that supports economic growth while contributing to national and global climate goals.

Battery energy storage projects have emerged as the dominant force in Australia's energy investment landscape, accounting for 46% of the nation's 64GW development pipeline, according to the Australian Energy Market Operator's (AEMO) latest quarterly report.

The Finnish start-up says its sand battery technology is scalable from 20 to 500 MWh with charging power from 1 to 20 MW, depending on industrial needs.

From ESS News

Finnish cleantech startup TheStorage says that its thermal storage technology could reduce industrial energy costs by up to 70% and cut carbon emissions by as much as 90%. The system converts renewable electricity into heat, stores it in sand, and delivers it on-demand for industrial heating.

The concept emerged in Finland in 2023, with engineering work beginning in 2024. In January 2026, TheStorage installed its first industrial-scale pilot at a brewery, putting the technology to the test in a real-world setting. There, it produces fossil-free steam for the brewery’s production lines.

“Producing steam without fossil fuels is a major step toward carbon-neutral production,” says Vesa Peltola, Production Director of the brewery.

TheStorage’s technology captures electricity when it is abundant and inexpensive, converts it into high-temperature heat, and stores it in sand. This stored heat can later be used in industrial processes independently of real-time electricity availability.

To continue reading, please visit our ESS News website.

Cubenergy has launched FlexCombo 2.0, a scalable battery energy storage system for utility, commercial, and industrial applications, offering up to 16 MWh capacity with LFP batteries. Its modular design, advanced BMS, and cloud-based operations enable easy installation, seamless expansion, and efficient grid integration, according to the manufacturer.

Cubenergy, a Chinese manufacturer of battery energy storage systems (BESS), has introduced a new energy block designed for utility, commercial, and industrial (C&I) applications.

The product, named FlexCombo 2.0, uses the company’s 835 kWh FlexCombo D2 batteries. It is available in three configurations: 10, 12, or 12 batteries, providing a total capacity of 8 MWh, 10 MWh, or 16 MWh, respectively.

“With the FlexCombo D2 modular design and parallel architecture, FlexCombo’s core advantage lies in its long-term scalability,” the company said in a statement. “It enables seamless capacity growth and effortless integration with power generation systems (PGS), simplifying deployment and accelerating delivery for ultimate flexibility.”

The FlexCombo D2 batteries feature lithium iron phosphate (LFP) chemistry, offering a lifespan of 8,000 cycles at 70% capacity retention, according to the manufacturer.

Each battery measures 2 m x 1.68 m x 2.55 m and has a weight of up to eight tons. They carry an IP55 protection rating. Each block also comes with a power conversion system (PCS) rated at 430 kW AC with an IP66 protection grade. Optional medium-voltage (MV) transformers are available, with AC power ratings of either 8,800 kVA or 5,250 kVA.

“The FlexCombo 2.0 is designed primarily for utility and C&I applications, including renewable energy arbitrage, stand-alone grid stabilization, factories, and commercial buildings,” the company stated. “This integrated, easy-to-install BESS can be quickly connected and aligned with project requirements, while the advanced Active Balancing battery management system (BMS) and cloud-based operations provide a superior user experience.”

The new Tesla Solar Panel and mounting system pairs with the company’s inverter, Powerwall battery, EV charging and vehicles, creating an all-Tesla residential solar offering for the first time.

From pv magazine USA

In the residential solar sector, the industry has long sought the “holy grail” of vertical integration, creating a single point of contact for hardware, software, and energy management.

While Tesla has been a dominant player in storage with the Powerwall, a market leader with its inverter, and in electric vehicles, the company has historically relied on third-party solar panels.

With the launch of the Tesla Solar Panel (TSP-415 and TSP-420), the company is closing that loop. The company’s new modules, assembled at its Gigafactory in Buffalo, New York, represent a significant shift toward a proprietary, integrated ecosystem designed to solve the common rooftop challenges of shading, aesthetic clutter, and installation friction.

“This panel completes the full package of the residential energy ecosystem,” Colby Hastings, senior director, Tesla Energy, told pv magazine USA. “It is based on our long history of innovation and engineering when it comes to solar.”

Domestic manufacturing

Tesla said the new modules are assembled at its Buffalo, NY facility, the same site where it continues to produce Solar Roof components, which inspired the design of the panel. The factory is currently scaling to an initial capacity of over 300 MW per year.

This domestic assembly allows Tesla to leverage federal manufacturing incentives while securing a local supply chain for its growing network of installers.

Power zones

The most technically significant departure from industry norms in the TSP series is the implementation of 18 independent “Power Zones.” Standard residential modules typically utilize three bypass diodes, creating six distinct zones. In traditional architectures, a single shadow from a chimney or vent pipe can effectively “shut down” large swaths of a string’s production.

Tesla’s design essentially triples the granularity of the module. By dividing the electrical architecture into 18 zones, the panel behaves more like a digital screen with a higher pixel count; if one “pixel” is shaded, the remaining 17 continue to harvest energy at near-peak efficiency.

While high-density substring architectures have been explored in the utility space, Tesla’s specific 18-zone layout is unique to the residential market, engineered to deliver optimizer-like performance without the added cost and potential failure points of module-level power electronics (MLPE) on the roof.

Inverters, batteries, and mounts

The TSP modules are designed to pair specifically with the Tesla Solar Inverter and Powerwall 3. While Tesla offers these as a unified “Home Energy Ecosystem,” they are not strictly sold as a single, inseparable bundle. However, the hardware is optimized to work as a package; for instance, the panel’s 18-zone design is specifically tuned to perform with Tesla’s string inverter technology.

Tesla is not keeping this technology exclusive to its own crews. While Tesla’s direct installation business leads the rollout, the package is available to Tesla’s network of over 1,000 certified installers.

This “installer-first” approach is further evidenced by the new Tesla Panel Mount. The new rail-less mounting system, made of black anodized aluminum alloy, uses the module frame itself as the structural rail.

By eliminating traditional rails and visible clamps, Tesla said the system is 33% faster to install. The mount sits closer to the roof and is enhanced by aesthetic front and side skirts, maintaining the “minimalist” look Tesla consumers expect.

Product specs

The modules are competitive with the current Tier 1 market, pushing into the 20% efficiency bracket while maintaining a robust mechanical profile, said the company.

Parameter	TSP-415	TSP-420
Nominal Power (Pmax)	415 W	420 W
Module Efficiency	20.3%	20.5%
Open Circuit Voltage (Voc)	40.92 V	40.95 V
Short Circuit Current (Isc)	12.93 A	13.03 A
Max System Voltage	DC 1000V	DC 1000V
Weight	22.3 kg (49 lbs.)	22.3 kg (49 lbs.)
Dimensions	1805 x 1135 x 40 mm	1805 x 1135 x 40 mm

 The new Tesla Solar Panels are now available nationwide. 

Solar roof 

For those wondering about the Tesla Solar Roof, the company maintains that the glass tile product remains a core part of its “premium” offering for customers needing a full roof replacement.

The cascading cell technology used in the new TSP modules, which overlaps cells to eliminate visible silver busbars, was originally designed in its Solar Roof product. Tesla is essentially taking the aesthetic and electrical innovations of its luxury roof product and integrating it into a traditional module form factor.

Virtual power plant

Tesla also highlighted the ability for virtual power plant (VPP) participation to increase value for its customers. VPPs coordinate the dispatch of energy stored in Powerwalls, acting as a distributed energy network. 

“We’re working more closely with utilities than ever to ensure that these assets participate in virtual power plants and support the grid and opening up new value streams, both for utilities and consumers that have these assets at home,” said Hastings. “We announced recently that we have a million Powerwalls deployed worldwide and 25% of those are enrolled in a virtual power plant program of some kind.”

Market strategy

The timing of this launch comes at a volatile moment for U.S. solar. With the passage of the “One Big Beautiful Bill” Act (OBBBA), the industry is navigating the early expiration of the 25D residential credit at the end of 2025 and the sunsetting of the 48E commercial credit.

Tesla’s move now is an opportunistic play for standardization and soft-cost reduction. By controlling the entire stack, Tesla can drive down customer acquisition and labor costs, which currently represent the largest portion of a system’s price tag.

“Utility rates across the country are going up, electricity is becoming increasingly unaffordable for homeowners,” said Hastings. “We’re still very bullish on the future of distributed energy here in the United States.”

Sungrow is introducing its large-scale energy storage system, PowerTitan 3.0, to Europe, featuring grid-forming capability, next-generation battery cells, DC coupling for co-located solar projects, and streamlined commissioning to accelerate deployment.

Sungrow is introducing its large-scale energy storage system, PowerTitan 3.0, to the European market. With the option to connect the battery to a central inverter on the DC side, the company is responding to strong demand for co-located solar-storage projects. The system was first presented at SNEC in Shanghai in June 2025 and has now been showcased to European developers at an event in Madrid.

The storage system is available in standard 10- and 20-foot container formats. The 20-foot version integrates a 1.78 MW power conversion system (PCS) with a 7.14 MWh battery, providing four hours of storage in a single container. A 30-foot version with roughly 12 MWh, also displayed in China, will not be offered in Europe due to logistics and transport costs, which could reduce project profitability. Larger systems in Europe can be achieved by connecting four units to form an AC block with approximately 7.2 MW of power and 28.5 MWh of capacity.

The higher energy density is enabled by new 648 Ah battery cells, with a volumetric energy density exceeding 440 Wh/L. A full liquid-cooling system and updated software maintain all cells within their optimal temperature range, reducing the system’s own energy consumption by around 10%, according to Sungrow. The company guarantees 10,000 cycles at 60% remaining capacity. State of charge is monitored at the rack level and synchronized across the system.

“We are seeing growing demand for stand-alone projects and a significant increase in co-location projects across Europe,” said Moritz Rolf, VP DACH at Sungrow. The DC coupling option is key to meeting this demand.

Paired with a PV system and Sungrow’s “1+X” central inverter, no separate PCS or medium-voltage switchgear is needed. The company estimates hardware and cabling savings for a 150 MWh project at around €1 million.

When connected on the AC side, the system includes an integrated PCS using silicon carbide MOSFETs. Maximum PCS efficiency is 99.5%, with a round-trip efficiency of 92%.

Fast commissioning

The PowerTitan 3.0 is delivered fully assembled and pre-configured. Commissioning is largely autonomous, taking about one hour per unit. A project can be connected to the grid in approximately 12 days, with no on-site parameterization required.

The system can also serve as an AC power source for plant certification tests. If a grid connection is not yet available, the battery can energize medium-voltage switchgear, inverters, and other equipment, simplifying logistics for commissioning and testing.

“Having completed the first stage of the energy transition—the expansion of renewables and their market integration—we are now entering the next phase: electrification, flexibility, and supply security,” said James Li, VP Europe of Sungrow, during a panel discussion.

Grid-forming capabilities were a central theme of the presentation. The system can provide short-circuit current with a ratio of 1.2, deliver instantaneous reserve power within five milliseconds, and contribute to harmonic attenuation, supporting grid strength and stability.

Antonio Arruebo, battery storage analyst at SolarPower Europe, highlighted the growing importance of these functions. Beyond frequency services, markets for instantaneous reserve, short-circuit current, and black-start capability are emerging across Europe. He stressed the need for early development of corresponding markets at EU and national levels, faster approval and certification processes for storage systems, and reduction of duplicate grid fees.

Key challenges

Discussions with event participants highlighted that, while the European battery storage market is developing positively overall, project financing remains a critical bottleneck. Highly leveraged projects are subject to intensive risk assessments by lenders, particularly regarding the valuation of future revenues from arbitrage and frequency markets. The long-term development of these markets is difficult to predict, directly affecting risk premiums and financing terms. Multi-bank financing structures appear to be becoming increasingly common.

From an investor perspective, the stability of revenue streams and technological risks are central. “The crucial factors are the resilience of the revenues and the likelihood of market mechanisms changing over time,” said Paula Renedo, Principal Engineer Director at Nuveen Infrastructure, during a panel discussion.

For battery storage, the balance between exposure to the stock market and contractually secured revenues is evolving. Creditworthiness of customers and technological reliability are gaining greater importance. “We look closely at proven technologies with robust operational experience, particularly regarding availability and degradation over the system’s lifespan,” Renedo added. Nuveen adopts conservative assumptions and engages external technical consultants to assess and mitigate these risks.

On pricing trends in the battery segment, and the Chinese government’s announcement requiring battery cell manufacturers to adopt “sustainable pricing,” Moritz Rolf noted that comparisons with recent photovoltaic module price trends are limited. PV modules have reached a high degree of commodification, whereas integrated large-scale storage systems involve numerous complex integration steps. As a result, prices equivalent to fractions of a cent per kilowatt, as seen in the module market, are not expected. After-sales service and local support remain critical for developers and operators. Sungrow currently employs around 800 people in Europe.

The Dutch start-up, founded by former Tesla leaders, is taking a novel approach to sodium-ion battery technology, optimizing it for integration with solar power plants. Its technology is set to be deployed for the first time in a Dutch solar-plus-storage project later this year.

From ESS News

Amsterdam-based Moonwatt has developed a new type of battery storage system based on sodium-ion NFPP chemistry, purpose-built for seamless solar hybridization. The system integrates battery enclosures with hybrid string inverters, enabling efficient DC-coupled solar-plus-storage integration.

The company gained attention in March 2025 when it raised $8.3 million in seed funding to accelerate growth. Moonwatt operates as an energy storage system integrator, designing, developing, and supplying string battery enclosures, hybrid string inverters, and battery management and site control systems, while sourcing sodium-ion cells globally.

“Initially, we’re sourcing them from Asia, but we aim to add American and European cell sourcing options as soon as they become available and create value for our customers,” Valentin Rota, co-founder and CCO of Moonwatt, said in an earlier interview with ESS News.

To continue reading, please visit our ESS News website.

The Australian Energy Market Operator (AEMO) has announced that renewable energy sources supplied more than half of the quarterly energy demand in the National Electricity Market (NEM) for the first time.

Conceived for stationary energy storage, the proposed sodium-ion battery configuration relies on an P2-type cathode material and an hard carbon anode material that reportedly ensure full-cell performance. Electrochemical testing revealed initial capacities of 200 mAh/g for the cathode and 360 mAh/g for the anode with capacity retentions of 42% and 67.4% after 100 cycles.

An international research team has designed a sodium-ion battery (SIB) storage system based on a P2-type cathode material known as Na0.67Mn0.33Ni0.33Fe0.33O2 and an anode relying on a hard carbon material fabricated from lavender flowers.

The proposed system configuration is intended for low-cost fabrication while ensuring scalability and environmental sustainability, as the two electrode materials are described as “widely accessible” precursors.

“Plant diversity and production capacity are important factors affecting the commercialization of SIBs, as plant-derived hard carbons s are both sustainable and economical,” the researchers explained. “Hard carbon derived from plants preserves the microstructures of the plant tissues, thereby enhancing the penetration of the electrolyte and sodium diffusivity.

The scientists estimated global lavender production at approximately 1,000–1,500 tons annually. However, only a small fraction of this production can be used for electrode materials, as only the flower residue is suitable for conversion into hard carbon.

They also noted that the hard carbon anode and P2-type cathode in the full cell have insufficient sodium reservoirs, leading to poor electrochemical performance. “The present work addresses this gap by evaluating the full-cell performance of P2-Na_0.67Mn_0.9Ni_0.1O₂ coupled with lavender flower waste-derived hard carbon under different presodiation approaches,” they further explained.

The scientists used X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy to characterized the SIB system's cathode and anode and found the cathode has an hexagonal P63/mmc structure, while the anode showed characteristic broad peaks of amorphous carbon.

SEM and TEM revealed, in particular, micrometer-sized cathode grains and a porous hard carbon surface, with EDS and XPS indicated the material has good structural stability. Further analysis also demonstrated that nickel (Ni) incorporation improved the cathode’s structural, electronic, and electrochemical performance.

Moreover, electrochemical testing revealed initial capacities of 200 mAh/g for the cathode and 360 mAh/g for the anode with capacity retentions of 42% and 67.4% after 100 cycles. Overall, Ni doping was found to improve the cathode’s conductivity and stability, and the anode demonstrated good sodium storage performance, supporting strong half-cell and potential full-cell performance, according to the researchers.

“This comprehensive study highlights the potential for developing SIBs with low-cost and sustainable electrode materials,” they concluded. “The optimization of presodiation strategies offers an opportunity for advanced commercial and scalable SIB technologies.”

The system was described in the study “Cost-effective sodium-ion batteries using a Na_0.67Mn_0.9Ni_0.1O₂ cathode and lavender-flower-waste-derived hard carbon with a comparative presodiation approach,” published in the Journal of Power Sources. The research team comprised scientists from Turkey's Inonu University, Istanbul Technical University, Malatya Turgut Ozal University and Aksaray University, as well as from Korea Institute of Science and Technology and Pakistan's Quaid-i-Azam University, among others. 

Sahand Karimi and Henry Swisher of OptiGrid examine the two primary metrics used to evaluate the performance of battery storage trading: normalised revenue and percentage of perfect capture rate.

Global infrastructure investor I Squared Capital has launched ANZA Power, a next-generation independent power producer (IPP) in Australia and New Zealand.

BlackRock-backed Akaysha Energy has commenced operations at its 205MW/410MWh Brendale battery energy storage system (BESS) in Queensland, Australia, delivering the project close to five months ahead of the original schedule.

BlackRock-backed developer Akaysha Energy is reportedly considering options to raise additional funds, including selling a minority stake, to support the expansion of its battery energy storage operations.

While coal and gas power plants grapple with cost increases, Australia's battery storage sector delivers a different story, with costs plummeting across all durations.

Aurora Energy Research has released its latest battery storage performance data, showing mixed revenue for storage across Australia's NEM.

Horizon Power has submitted an application under Australia's Environment Protection and Biodiversity Conservation (EPBC) Act for a 239MWh battery energy storage system (BESS) in Broome, Western Australia.