Researchers in Iraq have developed biomimetic leaf vein–inspired fins for photovoltaic panels, with reticulate (RET) venation reducing panel temperature by 33.6 C and boosting efficiency by 18% using passive cooling. Their study combines 3D CFD simulations and electrical evaluations to optimize fin geometry, offering a sustainable alternative to conventional cooling methods.

A research group from Iraq’s Al-Furat Al-Awsat Technical University has numerically investigated the thermal and electrical performance of PV panels integrated with leaf vein–inspired fins. They have simulated four types of venation used by plants, namely pinnate venation (PIN), reticulate venation (RET), parallel venation along the vertical axis (PAR-I), and parallel venation along the horizontal axis (PAR-II).

“The key novelty of our research lies in introducing and systematically optimizing biomimetic leaf vein–inspired fin geometries as passive heat sinks for photovoltaic panels,” corresponding author Yasser A. Jebbar told pv magazine. “While conventional cooling approaches rely on simple straight fins, fluids, or active systems, our study is among the first to directly translate natural leaf venation patterns—particularly RET structures—into manufacturable backside fins specifically tailored for PV thermal and electrical performance.”

The team combined detailed 3D computational fluid dynamics (CFD) modeling with electrical efficiency analysis to identify geometries that maximize heat dissipation without additional energy input or water consumption. Next steps include experimental validation of the leaf vein fin designs under real outdoor conditions, particularly in hot climates.

The simulated PV panel consisted of five layers: glass, two ethylene-vinyl acetate (EVA) layers, a solar cell layer, and a Tedlar layer, with a copper heat sink and fins attached. All fin configurations were initially 0.002 m thick, 0.03 m high, and spaced 0.05 m apart. Panels measured 0.5 m × 0.5 m, with a surrounding air velocity of 1.5 m/s and incident irradiance of 1,000 W/m².

RET fins outperformed all other designs, reducing operating temperature by 33.6 C and increasing electrical efficiency from 12.0% to 14.19% —an 18 % relative improvement—compared to uncooled panels.

“This temperature reduction rivals, and in some cases exceeds, water-based or hybrid cooling methods, despite relying solely on passive air cooling,” Jebbar noted. The study also highlighted the significant impact of fin height, more than spacing or thickness, on cooling performance.

The team further optimized the RET fins, varying spacing from 0.02–0.07 m, height from 0.02–0.07 m, and thickness from 0.002–0.007 m. The optimal geometry—0.03 m spacing, 0.05 m height, and 0.006 m thickness—achieved the maximum 33.6 C temperature reduction and 18% efficiency gain.

The novel cooling technique was described in “Improving Thermal and Electrical Performance of PV Panels Using Leaf Vein Fins,” published in Solar Energy. Researchers from Iraq’s Al-Furat Al-Awsat Technical University, University of Kerbala, and Sweden’s University of Gävle have participated in the study.

UNSW researchers identified a new damp-heat degradation mechanism in TOPCon modules with laser-fired contacts, driven primarily by rear-side recombination and open-circuit voltage loss rather than series-resistance increase. The study highlights that magnesium in white EVA encapsulants accelerates degradation, guiding improved encapsulant and backsheet selection for more reliable modules in humid environments.

A research team from the University of New South Wales (UNSW) has identifed a new damp heat-induced degradation pathway in TOPCon modules fabricated with laser-assisted fired contacts.

“Unlike earlier studies dominated by series-resistance increase, the primary degradation driver here is a reduction in open-circuit voltage, linked to enhanced rear-side recombination,” the research's lead author, Bram Hoex, told pv magazine. “The new degradation mechanism emerged under extended damp-heat (DH) exposure.”

The scientists conducted their analysis on 182 mm × 182 mm TOPCon cells fabricated in 2024 with laser-assisted firing.

The TOPCon solar cells employed a boron-doped p⁺ emitter, along with a front-side passivation stack consisting of unintentionally grown silicon dioxide (SiOₓ), aluminium oxide (Al₂O₃), and hydrogenated silicon nitride (SiNₓ:H), capped with a screen-printed H-pattern silver (Ag) contact grid. On the rear side, the structure comprised a SiO₂/phosphorus-doped n⁺ polycrystalline silicon/SiNₓ:H stack, also contacted by a screen-printed H-pattern Ag grid.

The researchers encapsulated the cells with different bill of materials (BOMs): two types of ethylene vinyl acetate (EVA); two types of polyolefin elastomer (POE); and one type of EVA-POE-EVA (EPE). They also used commercial coated polyethylene terephthalate (PET) composite (CPC) backsheets.

“The mini modules were laminated at 153 C for 8 min under standard industrial lamination conditions,” the academics explained. “All modules underwent DH test at 85 C and 85% relative humidity (RH) in an ASLi climate chamber for up to 2,000 h to study humidity-induced failures.

The tests showed that maximum power losses ranged from 6% to 16%, with the difference among these values depending strongly on the encapsulation BOM.

“The modules with POE on both sides were the most stable at around 8%, while those using white EVA on the rear side, especially in combination with EPE, showed the largest losses at around 16%,” said Hoex. “The primary driver of the degradation was a reduction in open-circuit voltage rather than the increased series resistance after DH testing, which diverges from previous findings that predominantly attributed DH-induced degradation to metallisation corrosion.”

The research team explained that higher levels of degradation were attributable to additives containing magnesium (Mg) in white EVA, which migrate under DH, hydrate, and create an alkaline micro-environment. “This alkaline chemistry corrodes the rear SiNx passivation layer, increases interfacial hydrogen concentration, induces local pinhole-like defects, and raises dark saturation current, ultimately reducing open-circuit voltage,” Hoex emphasized.

The scientists also explained that, although Mg in white EVA encapsulants and its role in acetic acid–induced degradation was previously reported, the effect of MgO on performance degradation in TOPCon modules was not explicitly studied.

Their findings are available in the paper “A novel damp heat-induced failure mechanism in PV modules (with case study in TOPCon),”  published in Solar Energy Materials and Solar Cells.

“We hope this work helps refine encapsulant and BOM selection strategies for next-generation TOPCon modules, particularly for humid-climate deployment,” Hoex concluded. “It provides clear guidance for controlling Mg content in rear encapsulants and optimising rear-side passivation robustness. The mechanistic insights from this study have already informed upstream design changes, substantially reducing risk in commercial modules.”

Other research by UNSW showed the impact of POE encapsulants in TOPCon module corrosion, soldering flux on TOPCon solar cell performance, degradation mechanisms of industrial TOPCon solar modules encapsulated with ethylene vinyl acetate (EVA) under accelerated damp-heat conditions, as well as the vulnerability of TOPCon solar cells to contact corrosion and three types of TOPCon solar module failures that were never detected in PERC panels.

Furthermore, UNSW scientists investigated sodium-induced degradation of TOPCon solar cells under damp-heat exposure, the role of ‘hidden contaminants’ in the degradation of both TOPCon and heterojunction devices, and the impact of electron irradiation on PERC, TOPCon solar cell performance.

More recently, another UNSW rsearch team developed an experimentally validated model linking UV-induced degradation in TOPCon solar cells to hydrogen transport, charge trapping, and permanent structural changes in the passivation stack.

The Finnish start-up says its sand battery technology is scalable from 20 to 500 MWh with charging power from 1 to 20 MW, depending on industrial needs.

From ESS News

Finnish cleantech startup TheStorage says that its thermal storage technology could reduce industrial energy costs by up to 70% and cut carbon emissions by as much as 90%. The system converts renewable electricity into heat, stores it in sand, and delivers it on-demand for industrial heating.

The concept emerged in Finland in 2023, with engineering work beginning in 2024. In January 2026, TheStorage installed its first industrial-scale pilot at a brewery, putting the technology to the test in a real-world setting. There, it produces fossil-free steam for the brewery’s production lines.

“Producing steam without fossil fuels is a major step toward carbon-neutral production,” says Vesa Peltola, Production Director of the brewery.

TheStorage’s technology captures electricity when it is abundant and inexpensive, converts it into high-temperature heat, and stores it in sand. This stored heat can later be used in industrial processes independently of real-time electricity availability.

To continue reading, please visit our ESS News website.

Scientists have grown organic romaine lettuce under 13 different types of PV modules, in an unusual hot Canadian summer. Their analysis showed lettuce yields increased by over 400% compared to unshaded control plants.

A research group from Canada’s Western University has investigated the performance of organic romaine lettuce, a heat-sensitive crop, under a broad range of agrivoltaic conditions. The test was conducted in London, Ontario, in the summer of 2025, during which 18 days had temperatures over 30 C.

“Our study explores how agrivoltaic systems can be tailored to optimize crop growth, especially under extreme heat conditions, while contributing to sustainable energy generation,” corresponding researcher Uzair Jamil told pv magazine.

“This becomes especially relevant in the context of climate change, where we are experiencing temperature extremes across the world,” Jamil added. “We examined the performance of organic romaine lettuce under thirteen different agrivoltaic configurations – ranging from crystalline silicon PV to thin-film-colored modules (red, blue, green) – in outdoor, high-temperature stress conditions.”

More specifically, the experiment included c-Si modules with 8%, 44% and 69% transparency rate; blue c-Si modules with transparency of 60%, 70%, and 80%; green c-Si modules with transparency of 60%, 70%, and 80%; and red c-Si modules with transparency of of 40%, 50%, 70%, and 80%.

All agrivoltaics installations had a leading-edge height of 2.0 m and a trailing-edge height of 2.8 m, and the modules were oriented southwards at 34◦. Pots with organic romaine lettuce were placed under all configurations, along with three pots fully exposed to ambient sunlight without shading, used as controls.

In addition to measurements against the control, the scientific group has compared the results to the national average per-pot yield for 2022, which included less high-temperature days and was therefore considered typical. Those data points were taken from agricultural census data, which later enabled the researcher also to create nationwide projections of their results.

“Lettuce yields increased by over 400% compared to unshaded control plants, and 200% relative to national average yields,” Jamil said about the results. “60% transparent blue Cd-Te and 44% transparent crystalline silicon PV modules delivered the highest productivity gains, demonstrating the importance of both shading intensity and spectral quality in boosting plant growth.”

Jamil further added that if agrivoltaic were to scale up to protect Canada’s entire lettuce crop, they could add 392,000 tonnes of lettuce.

“That translates into CAD $62.9 billion (USD $46.6 billion) in revenue over 25 years,” he said. “If scaled across Canada, agrivoltaics could also reduce 6.4 million tonnes of CO2 emissions over 25 years, making it a key player in reducing the agricultural sector’s environmental footprint.”

The results of the research work were presented in “Enhancing heat stress tolerance in organic romaine lettuce using crystalline silicon and red, blue & green-colored thin film agrivoltaic systems,” published in Solar Energy.

Cubenergy has launched FlexCombo 2.0, a scalable battery energy storage system for utility, commercial, and industrial applications, offering up to 16 MWh capacity with LFP batteries. Its modular design, advanced BMS, and cloud-based operations enable easy installation, seamless expansion, and efficient grid integration, according to the manufacturer.

Cubenergy, a Chinese manufacturer of battery energy storage systems (BESS), has introduced a new energy block designed for utility, commercial, and industrial (C&I) applications.

The product, named FlexCombo 2.0, uses the company’s 835 kWh FlexCombo D2 batteries. It is available in three configurations: 10, 12, or 12 batteries, providing a total capacity of 8 MWh, 10 MWh, or 16 MWh, respectively.

“With the FlexCombo D2 modular design and parallel architecture, FlexCombo’s core advantage lies in its long-term scalability,” the company said in a statement. “It enables seamless capacity growth and effortless integration with power generation systems (PGS), simplifying deployment and accelerating delivery for ultimate flexibility.”

The FlexCombo D2 batteries feature lithium iron phosphate (LFP) chemistry, offering a lifespan of 8,000 cycles at 70% capacity retention, according to the manufacturer.

Each battery measures 2 m x 1.68 m x 2.55 m and has a weight of up to eight tons. They carry an IP55 protection rating. Each block also comes with a power conversion system (PCS) rated at 430 kW AC with an IP66 protection grade. Optional medium-voltage (MV) transformers are available, with AC power ratings of either 8,800 kVA or 5,250 kVA.

“The FlexCombo 2.0 is designed primarily for utility and C&I applications, including renewable energy arbitrage, stand-alone grid stabilization, factories, and commercial buildings,” the company stated. “This integrated, easy-to-install BESS can be quickly connected and aligned with project requirements, while the advanced Active Balancing battery management system (BMS) and cloud-based operations provide a superior user experience.”

Researchers at SUPSI found that six Swiss PV systems installed in the late 1980s and early 1990s show exceptionally low degradation rates of just 0.16% to 0.24% per year after more than 30 years of operation. The study shows that thermal stress, ventilation, and material design play a greater role in long-term module reliability than altitude or irradiance alone.

A research group led by Switzerland's University of Applied Sciences (SUPSI) has carried out a long-term analysis of six south-facing, grid-connected PV systems installed in Switzerland in the late 1980s and early 1990s. The researchers found that the systems’ annual power loss rates averaged 0.16% to 0.24%, significantly lower than the 0.75% to 1% per year commonly reported in the literature.

The study examined four low-altitude rooftop systems located in Möhlin (310m-VR-AM55), Tiergarten East and West in Burgdorf (533m-VR-SM55(HO)), and Burgdorf Fink (552m-BA-SM55). These installations use ventilated or building-applied rooftop configurations. The analysis also included a mid-altitude utility-scale plant in Mont-Soleil (1270m-OR-SM55) and two high-altitude, facade-mounted systems in Birg (2677m-VF-AM55) and Jungfraujoch (3462m-VF-SM75).

All systems are equipped with either ARCO AM55 modules manufactured by US-based Arco Solar, which was the world’s largest PV manufacturer with just 1 MW capacity at the time, or Siemens SM55, SM55-HO, and SM75 modules. Siemens became Arco Solar’s largest shareholder in 1990. The modules have rated power outputs between 48 W and 55 W and consist of a glass front sheet, ethylene-vinyl acetate (EVA) encapsulant layers, monocrystalline silicon cells, and a polymer backsheet laminate.

The test setup included on-site monitoring of AC and DC power output, ambient and module temperatures, and plane-of-array irradiance measured using pyranometers. Based on site conditions, the researchers classified the installations into low-, mid-, and high-altitude climate zones.

“For benchmarking purposes, two Siemens SM55 modules have been stored in a controlled indoor environment at the Photovoltaic Laboratory of the Bern University of Applied Sciences since the start of the monitoring campaign,” the researchers said. They also applied the multi-annual year-on-year (multi-YoY) method to determine system-level performance loss rates (PLR).

The results show that PLRs across all systems range from -0.12% to -0.55% per year, with an average of -0.24% to -0.16% per year, well below typical degradation rates reported for both older and modern PV systems. The researchers also found that higher-altitude systems generally exhibit higher average performance ratios and lower degradation rates than comparable low-altitude installations, despite exposure to higher irradiance and ultraviolet radiation.

The study further revealed that modules of the same nominal type but with different internal designs show markedly different degradation behaviour. Standard SM55 modules exhibited recurring solder bond failures, leading to increased series resistance and reduced fill factor. By contrast, SM55-HO modules benefited from a modified backsheet design that provides higher internal reflectance and improved long-term stability.

Overall, the findings indicate that long-term degradation in early-generation PV modules is driven primarily by thermal stress, ventilation conditions, and material design, rather than altitude or irradiance alone. Modules installed in cooler, better-ventilated environments demonstrated particularly stable performance over multiple decades.

The test results were presented in the paper “Three decades, three climates: environmental and material impacts on the long-term reliability of photovoltaic modules,” published in EES Solar.

“The study identified the bill-of-material (BOM) as the most critical factor influencing PV module longevity,” they concluded. “Despite all modules belonging to the same product family, variations in encapsulant quality, filler materials, and manufacturing processes resulted in significant differences in degradation rates. Early-generation encapsulants without UV stabilisation showed accelerated ageing, while later module designs with optimised backsheets and improved production quality demonstrated outstanding long-term stability.”

In a new weekly update for pv magazine, OPIS, a Dow Jones company, provides a quick look at the main price trends in the global PV industry.

China’s TOPCon cell prices rose for a fourth consecutive week, led by higher production costs from surging silver prices and ongoing discussions around the removal of export tax rebates. In contrast, PERC cell prices declined amid weakening demand, due to the industry’s continued technological shift towards TOPCon cells, according to trade sources.

According to the OPIS Global Solar Markets Report released on January 20, Chinese TOPCon M10 cell prices were assessed 2.24% higher on the week at $0.0547/W Free-On-Board (FOB) China. Meanwhile, FOB China Mono PERC M10 cells fell 2.53% to $0.0463/W over the same period.

Silver prices have surged to record highs, gaining more than 40% year-to-date, driven by rising industrial demand and increased investment flows. Chinese policy developments have also further tightened the market, with authorities introducing export restrictions on silver through 2027.

Under the new framework, only 44 approved companies are permitted to export silver under a quota-based licensing system, requiring exporters to secure approval for overseas shipments.

Market sources said silver prices have become a key variable for cell pricing, as silver now represents one of the largest cost components in TOPCon cell manufacturing. Several sources noted that even if upstream prices soften from Q2 2026, cell and module prices are unlikely to retreat to 2025 price levels should silver prices remain elevated.

Since the start of this year, downstream OPIS TOPCon cell prices have surged 46%, while TOPCon module prices climbed nearly 35%. Upstream cost increases have been more modest, with OPIS China Mono Premium—OPIS' assessment for mono-grade polysilicon used in N-type ingot production—up 0.15% and N-type wafer prices up around 13% over the same period.

This week, upstream polysilicon and wafers segments showed early signs of weakness, with OPIS China Mono Premium and N-type M10 wafers down 2.34% and 2.20%, respectively. In contrast, FOB China TOPCon modules continued to edge higher by 3.48% over the same period.

According to the China Nonferrous Metals Industry Association (CNMIA), sentiment in the wafer segment remained cautious this week, with upstream and downstream players locked in a stalemate. Despite continued price gains in cells and modules, driven by export tax rebate policy changes and rising silver prices, price increases have yet to effectively transmit upstream.

CNMIA noted that domestic end demand remains sluggish, and under cost pressure, cell manufacturers have become increasingly reluctant to accept high-priced wafers, resulting in few wafer procurement orders.

With downstream demand unlikely to recover meaningfully before the Lunar New Year, and polysilicon prices showing signs of softening, the wafer market is expected to stay weak in the near term, the association added.

Downstream sources added that higher production costs, combined with weak end-user module demand, could limit cell output levels in the longer term.

Market analysts have previously projected China’s installation demand to fall by over 20% in 2026, following the transition from feed-in-tariffs to a market-based electricity pricing mechanism. Furthermore, the planned removal of export tax rebates may weigh on overseas demand, reinforcing a bearish demand outlook for cells later this year, sources said.

OPIS, a Dow Jones company, provides energy prices, news, data, and analysis on gasoline, diesel, jet fuel, LPG/NGL, coal, metals, and chemicals, as well as renewable fuels and environmental commodities. It acquired pricing data assets from Singapore Solar Exchange in 2022 and now publishes the OPIS APAC Solar Weekly Report.

Dutch utility Eneco is testing low-noise air-to-water heat pumps from startup Whspr in around 20 homes, aiming to ease installation constraints near property boundaries. The systems reportedly achieve coefficients of performance of up to 5 and show up to 80% noise reduction in laboratory testing.

Dutch utility Eneco has begun testing an”innovative” type of air-to-water heat pump with low sound levels in residential buildings.

The company said conventional heat pumps rely on outdoor units that emit a constant hum, requiring installations several metres from property boundaries under Dutch building regulations and often forcing placement in prominent locations on terraced houses. By contrast, the “silent” heat pumps under test can be installed just 30 cm from the boundary.

“The pilot will provide insight into both ease of installation and real-world performance,” Eneco said in a statement. “The results will be used to further optimize the system, with the aim of making it widely available by the end of the summer.” The company added that around 20 homes are currently equipped with the systems to assess noise levels without “compromising residents’ everyday heating comfort.”

The heat pumps are supplied by Dutch startup Whspr. “Our 4 kW freestanding hybrid monoblock systems are designed for domestic space heating,” founder Hugo Huis in ’t Veld told pv magazine.

The unit measures 60 cm × 60 cm × 90 cm and weighs around 70 kg. “It is compact yet robust,” Huis in ’t Veld said, adding that initial measurements show efficiencies in line with the market, with coefficients of performance (COP) of between 4.5 and 5.0.

According to the manufacturer, the heat pump uses propane (R290) as its refrigerant and shows up to 80% noise reduction in laboratory testing.

Whspr also highlights ease of installation, stating that a single installer can fit and connect the unit, including the water side, in one day. A dedicated control and thermostat system has also been developed to reduce compatibility issues and simplify commissioning.

Further technical details have not yet been disclosed. “We are not at liberty to share designs at this stage, as patents are still pending,” Huis in ’t Veld said.

Eneco noted that pilot installations include both standard locations and more complex sites, such as rooftops and sheds at the end of gardens. The systems have also been installed in several rental homes owned by housing association Wooncompagnie. “Testing will continue until the end of April, after which the heat pumps will be further optimized,” the company said.

The UK-based perovskite solar PV specialist has announced a new metrology research project with Swansea University and a new development agreement with Renolit, a German plastic films, sheets and polymer solutions company.

Power Roll, a UK-based perovskite solar PV specialist, has announced a new metrology research project with Swansea University and a joint development agreement with Renolit, a German plastic films, sheets and polymer solutions company, which will begin with an outdoor field trial in Germany.

In the U.K., samples of Power Roll's patented flexible, micro-groove perovskite solar PV film will be provided to researchers at Swansea University and the National Physical Laboratory in a six-month feasibility project to support the development of inline and end-of-line testing tools for perovskite solar cells.

It also involves the development of stability guidelines for industry standards. Without these advancements, perovskite solar cell companies “could face significant hurdles in achieving product accreditation,” noted the company.

“The project will support scalable roll-to-roll manufacturing of lightweight perovskite PV, delivering commercial prototypes, testing protocols, and an invited academic review to strengthen UK capability in advanced semiconductor photovoltaics,” Nathan Hill, Power Roll Senior Scientist, told pv magazine.

It entails assessment of standards, metrology techniques, equipment, routes to characterize large scale devices and artificial intelligence (AI) pertaining to monitoring during manufacture.

In December, Renolit and Power Roll announced an 18-month joint development agreement that will begin with an outdoor trial of the UK company’s micro-groove perovskite prototypes on a Renolit building façade in Germany.

The initial deployment will be one to two square meters. There are plans to scale it up in size and power capacity as the project progresses, according to Hill.

“The purpose is to monitor and validate real-world performance and durability, and to understand the potential of the micro-groove solar technology,” Neil Spann, Power Roll CEO, told pv magazine.

Renolit has a commercial interest as a potential supplier of certain film layers to Power Roll, but also to explore integrating Power Roll's solar film into its existing building materials product lines, and to explore the potential of manufacturing under license in Europe, according to Spann.

Power Roll has also completed tests of smaller devices at its headquarters.

Renolit France, the French branch of the German company, recently launched a new PVC-based mounting product for rooftop PV systems.

Power Roll, founded in 2012, has proven its technology and manufacturing process, and secured 27 patent families.

Researchers in South Korea improved the performance of tin monosulfide (SnS) solar cells with a potassium fluoride-assisted post-treatment and a vapor transport deposition process. The treated solar cells had a power conversion efficiency of 4.10% and reduced recombination sites, compared to 3.42% for untreated devices.

Research led by Chonnam National University in South Korea has improved the performance of tin monosulfide (SnS) solar cells with a potassium fluoride-assisted (KF) post-treatment and a vapor transport deposition (VTD) process. The treated solar cells had a power conversion efficiency of 4.10% and reduced recombination sites, compared to control devices.

The research topic is complementary to the research group's earlier germanium oxide (GeOx) interlayer study, which achieved a 4.81% cell efficiency, according to first author of the research, Rahul Kumar Yadav.

“The KF treatment enhances the intrinsic quality of the SnS absorber surface, providing a superior foundation for subsequent interface engineering, while the GeO_x interlayer optimizes band alignment and suppresses recombination at the rear contact,” Kumar Yadav, told pv magazine.

“In our ongoing work, we are actively combining KF surface treatment with GeO_x back interface engineering, as we expect their integration to deliver further gains in voltage, operational stability, and overall device efficiency,” he added.

In the study, the researchers varied the concentration of KF solution to measure the effect of drop-cast KF surface treatment on the structural, morphological, and photovoltaic properties of VTD-SnS absorber layers.

Testing showed that the KF treatment enhanced “film uniformity, densification, and wettability.” Devices based on the optimized KF-treated SnS absorber had a PCE 4.10%, an improvement compared to 3.42% for untreated devices, with further analysis revealing reduced recombination sites.

“The KF-assisted solution post-treatment functions as a surface modulation step, improving grain connectivity, reducing surface roughness, and passivating electrically active defects,” said Kumar Yadav, adding that the resulting higher open-circuit voltage and fill factor, enabled enhanced efficiency “without altering the overall device architecture.”

The researchers concluded that the research represents a “scalable strategy to overcome key interfacial limitations” and to advance SnS thin-film photovoltaics.

Also participating in the study were Korea Aerospace University and Kyungpook National University.

The work is detailed in “Modulating surface morphology via potassium fluoride-assisted solution post-treatment enables VTD-SnS thin film solar cells to achieve over 4% efficiency,” which appears in Materials Today Energy.

Looking ahead, the group is focused on developing SnS thin-film solar cells beyond the 4% efficiency threshold “through coordinated absorber surface, heterojunction interface, and rear interface engineering, while maintaining compatibility with scalable manufacturing processes,” said Kumar Yadav.

The new Tesla Solar Panel and mounting system pairs with the company’s inverter, Powerwall battery, EV charging and vehicles, creating an all-Tesla residential solar offering for the first time.

From pv magazine USA

In the residential solar sector, the industry has long sought the “holy grail” of vertical integration, creating a single point of contact for hardware, software, and energy management.

While Tesla has been a dominant player in storage with the Powerwall, a market leader with its inverter, and in electric vehicles, the company has historically relied on third-party solar panels.

With the launch of the Tesla Solar Panel (TSP-415 and TSP-420), the company is closing that loop. The company’s new modules, assembled at its Gigafactory in Buffalo, New York, represent a significant shift toward a proprietary, integrated ecosystem designed to solve the common rooftop challenges of shading, aesthetic clutter, and installation friction.

“This panel completes the full package of the residential energy ecosystem,” Colby Hastings, senior director, Tesla Energy, told pv magazine USA. “It is based on our long history of innovation and engineering when it comes to solar.”

Domestic manufacturing

Tesla said the new modules are assembled at its Buffalo, NY facility, the same site where it continues to produce Solar Roof components, which inspired the design of the panel. The factory is currently scaling to an initial capacity of over 300 MW per year.

This domestic assembly allows Tesla to leverage federal manufacturing incentives while securing a local supply chain for its growing network of installers.

Power zones

The most technically significant departure from industry norms in the TSP series is the implementation of 18 independent “Power Zones.” Standard residential modules typically utilize three bypass diodes, creating six distinct zones. In traditional architectures, a single shadow from a chimney or vent pipe can effectively “shut down” large swaths of a string’s production.

Tesla’s design essentially triples the granularity of the module. By dividing the electrical architecture into 18 zones, the panel behaves more like a digital screen with a higher pixel count; if one “pixel” is shaded, the remaining 17 continue to harvest energy at near-peak efficiency.

While high-density substring architectures have been explored in the utility space, Tesla’s specific 18-zone layout is unique to the residential market, engineered to deliver optimizer-like performance without the added cost and potential failure points of module-level power electronics (MLPE) on the roof.

Inverters, batteries, and mounts

The TSP modules are designed to pair specifically with the Tesla Solar Inverter and Powerwall 3. While Tesla offers these as a unified “Home Energy Ecosystem,” they are not strictly sold as a single, inseparable bundle. However, the hardware is optimized to work as a package; for instance, the panel’s 18-zone design is specifically tuned to perform with Tesla’s string inverter technology.

Tesla is not keeping this technology exclusive to its own crews. While Tesla’s direct installation business leads the rollout, the package is available to Tesla’s network of over 1,000 certified installers.

This “installer-first” approach is further evidenced by the new Tesla Panel Mount. The new rail-less mounting system, made of black anodized aluminum alloy, uses the module frame itself as the structural rail.

By eliminating traditional rails and visible clamps, Tesla said the system is 33% faster to install. The mount sits closer to the roof and is enhanced by aesthetic front and side skirts, maintaining the “minimalist” look Tesla consumers expect.

Product specs

The modules are competitive with the current Tier 1 market, pushing into the 20% efficiency bracket while maintaining a robust mechanical profile, said the company.

 The new Tesla Solar Panels are now available nationwide. 

Solar roof 

For those wondering about the Tesla Solar Roof, the company maintains that the glass tile product remains a core part of its “premium” offering for customers needing a full roof replacement.

The cascading cell technology used in the new TSP modules, which overlaps cells to eliminate visible silver busbars, was originally designed in its Solar Roof product. Tesla is essentially taking the aesthetic and electrical innovations of its luxury roof product and integrating it into a traditional module form factor.

Virtual power plant

Tesla also highlighted the ability for virtual power plant (VPP) participation to increase value for its customers. VPPs coordinate the dispatch of energy stored in Powerwalls, acting as a distributed energy network. 

“We’re working more closely with utilities than ever to ensure that these assets participate in virtual power plants and support the grid and opening up new value streams, both for utilities and consumers that have these assets at home,” said Hastings. “We announced recently that we have a million Powerwalls deployed worldwide and 25% of those are enrolled in a virtual power plant program of some kind.”

Market strategy

The timing of this launch comes at a volatile moment for U.S. solar. With the passage of the “One Big Beautiful Bill” Act (OBBBA), the industry is navigating the early expiration of the 25D residential credit at the end of 2025 and the sunsetting of the 48E commercial credit.

Tesla’s move now is an opportunistic play for standardization and soft-cost reduction. By controlling the entire stack, Tesla can drive down customer acquisition and labor costs, which currently represent the largest portion of a system’s price tag.

“Utility rates across the country are going up, electricity is becoming increasingly unaffordable for homeowners,” said Hastings. “We’re still very bullish on the future of distributed energy here in the United States.”

Sungrow is introducing its large-scale energy storage system, PowerTitan 3.0, to Europe, featuring grid-forming capability, next-generation battery cells, DC coupling for co-located solar projects, and streamlined commissioning to accelerate deployment.

Sungrow is introducing its large-scale energy storage system, PowerTitan 3.0, to the European market. With the option to connect the battery to a central inverter on the DC side, the company is responding to strong demand for co-located solar-storage projects. The system was first presented at SNEC in Shanghai in June 2025 and has now been showcased to European developers at an event in Madrid.

The storage system is available in standard 10- and 20-foot container formats. The 20-foot version integrates a 1.78 MW power conversion system (PCS) with a 7.14 MWh battery, providing four hours of storage in a single container. A 30-foot version with roughly 12 MWh, also displayed in China, will not be offered in Europe due to logistics and transport costs, which could reduce project profitability. Larger systems in Europe can be achieved by connecting four units to form an AC block with approximately 7.2 MW of power and 28.5 MWh of capacity.

The higher energy density is enabled by new 648 Ah battery cells, with a volumetric energy density exceeding 440 Wh/L. A full liquid-cooling system and updated software maintain all cells within their optimal temperature range, reducing the system’s own energy consumption by around 10%, according to Sungrow. The company guarantees 10,000 cycles at 60% remaining capacity. State of charge is monitored at the rack level and synchronized across the system.

“We are seeing growing demand for stand-alone projects and a significant increase in co-location projects across Europe,” said Moritz Rolf, VP DACH at Sungrow. The DC coupling option is key to meeting this demand.

Paired with a PV system and Sungrow’s “1+X” central inverter, no separate PCS or medium-voltage switchgear is needed. The company estimates hardware and cabling savings for a 150 MWh project at around €1 million.

When connected on the AC side, the system includes an integrated PCS using silicon carbide MOSFETs. Maximum PCS efficiency is 99.5%, with a round-trip efficiency of 92%.

Fast commissioning

The PowerTitan 3.0 is delivered fully assembled and pre-configured. Commissioning is largely autonomous, taking about one hour per unit. A project can be connected to the grid in approximately 12 days, with no on-site parameterization required.

The system can also serve as an AC power source for plant certification tests. If a grid connection is not yet available, the battery can energize medium-voltage switchgear, inverters, and other equipment, simplifying logistics for commissioning and testing.

“Having completed the first stage of the energy transition—the expansion of renewables and their market integration—we are now entering the next phase: electrification, flexibility, and supply security,” said James Li, VP Europe of Sungrow, during a panel discussion.

Grid-forming capabilities were a central theme of the presentation. The system can provide short-circuit current with a ratio of 1.2, deliver instantaneous reserve power within five milliseconds, and contribute to harmonic attenuation, supporting grid strength and stability.

Antonio Arruebo, battery storage analyst at SolarPower Europe, highlighted the growing importance of these functions. Beyond frequency services, markets for instantaneous reserve, short-circuit current, and black-start capability are emerging across Europe. He stressed the need for early development of corresponding markets at EU and national levels, faster approval and certification processes for storage systems, and reduction of duplicate grid fees.

Key challenges

Discussions with event participants highlighted that, while the European battery storage market is developing positively overall, project financing remains a critical bottleneck. Highly leveraged projects are subject to intensive risk assessments by lenders, particularly regarding the valuation of future revenues from arbitrage and frequency markets. The long-term development of these markets is difficult to predict, directly affecting risk premiums and financing terms. Multi-bank financing structures appear to be becoming increasingly common.

From an investor perspective, the stability of revenue streams and technological risks are central. “The crucial factors are the resilience of the revenues and the likelihood of market mechanisms changing over time,” said Paula Renedo, Principal Engineer Director at Nuveen Infrastructure, during a panel discussion.

For battery storage, the balance between exposure to the stock market and contractually secured revenues is evolving. Creditworthiness of customers and technological reliability are gaining greater importance. “We look closely at proven technologies with robust operational experience, particularly regarding availability and degradation over the system’s lifespan,” Renedo added. Nuveen adopts conservative assumptions and engages external technical consultants to assess and mitigate these risks.

On pricing trends in the battery segment, and the Chinese government’s announcement requiring battery cell manufacturers to adopt “sustainable pricing,” Moritz Rolf noted that comparisons with recent photovoltaic module price trends are limited. PV modules have reached a high degree of commodification, whereas integrated large-scale storage systems involve numerous complex integration steps. As a result, prices equivalent to fractions of a cent per kilowatt, as seen in the module market, are not expected. After-sales service and local support remain critical for developers and operators. Sungrow currently employs around 800 people in Europe.

The South Korean giant said its new EHS All-in-One provides air heating and cooling, floor heating, and hot water from a single outdoor unit. It can supply hot water up to 65 C in below-zero weather.

South Korean tech giant Samsung has launched a new all-in-one heat pump for residential and commercial use.

Dubbed EHS All-in-One, the system provides air heating and cooling, floor heating, and hot water from a single outdoor unit. It is initially released for the European market, with a Korean rollout expected within a year.

“It delivers stable performance across diverse weather conditions. It can supply hot water up to 65 C even in below-zero weather and is designed to operate heating even in severe cold down to -25 C,” the company said in a statement. “The system also uses the R32 refrigerant, which has a substantially lower impact on global warming compared with the older R410A refrigerant.”

The product is an upgrade to the EHS Mono R290 monobloc heat pump that the company released in 2023. The company has enlarged the propeller fan and used a high-capacity motor in the novel model, reducing the number of fans from two to one. That results in a design with a height of about 850 mm, approximately 40% lower than before.

“The system also introduces a new Heat Recovery feature, which does not release waste heat from the cooling process to the outside but recycles it. Using this feature can boost the energy efficiency of water heating by more than twice under certain conditions,” Samsung added. “It also includes an ‘AI Saving Mode’ that can reduce energy consumption by up to 17%.”

The Dutch start-up, founded by former Tesla leaders, is taking a novel approach to sodium-ion battery technology, optimizing it for integration with solar power plants. Its technology is set to be deployed for the first time in a Dutch solar-plus-storage project later this year.

From ESS News

Amsterdam-based Moonwatt has developed a new type of battery storage system based on sodium-ion NFPP chemistry, purpose-built for seamless solar hybridization. The system integrates battery enclosures with hybrid string inverters, enabling efficient DC-coupled solar-plus-storage integration.

The company gained attention in March 2025 when it raised $8.3 million in seed funding to accelerate growth. Moonwatt operates as an energy storage system integrator, designing, developing, and supplying string battery enclosures, hybrid string inverters, and battery management and site control systems, while sourcing sodium-ion cells globally.

“Initially, we’re sourcing them from Asia, but we aim to add American and European cell sourcing options as soon as they become available and create value for our customers,” Valentin Rota, co-founder and CCO of Moonwatt, said in an earlier interview with ESS News.

To continue reading, please visit our ESS News website.

Solar Energy Expo 2026, Poland’s flagship PV-plus-storage trade fair, returned this month with a small show-floor footprint but a sharp focus on flexibility and market reform, as well as the storage, inverter and grid-forming technologies shaping the nation’s next phase of grid integration.

Solar Energy Expo 2026 opened to visitors from Jan. 13 to 15 at Ptak Warsaw Expo, an exhibition center in the southwestern suburbs of the Polish capital. The sprawling complex – bordered on one side by an expressway and on the other by dense forest teeming with wild boar – only opened two halls for Poland's premier storage and solar event this year, leaving wide stretches of empty or partitioned‑off floor space.

That said, the slimmed-down affair – relatively low-key by global trade-fair standards – still held its own as one of Central and Eastern Europe’s most important regional renewables events – a claim backed by numbers. According to the event organizer, the fifth edition of Solar Energy Expo attracted 20,176 industry visitors, up 11% year on year, including 2,087 from foreign countries. It featured 315 exhibitors across 40,000 m² of exhibition space.

The 2026 edition of the solar fair was also held in tandem with the fifth PIME Storage Energy Summit, a pairing that shifted the week’s focus squarely onto storage policy, flexibility markets, and system‑planning debates. The storage summit has grown into one of Poland’s most influential energy‑system forums, and this year’s program reflected a sector in transition.

Poland’s solar market continues to expand at one of the fastest rates in Europe. The country surpassed 20 GW of cumulative PV capacity at the end of 2024 and reached 21.8 GW by the first quarter of 2025, according to the Instytut Energetyki Odnawialnej (IEO), Poland's leading independent think tank specializing in renewable energy. Annual PV additions hit 3.7 GW in 2024, with the IEO projecting similar growth in 2025 and 2026 as utility‑scale projects take a larger share of the market.

Meanwhile, Poland’s energy‑market reform drive is gathering real momentum as electrification accelerates across transport, heating and industry. Consulting firm Arthur D. Little projects national electricity demand rising from 154 TWh in 2024 to as much as 210 TWh to 230 TWh by 2040 – a structural shift that tightens the screws on a system already strained by coal retirements. That surge is forcing policymakers and system operators to confront the limits of the current market design and move beyond incremental fixes, accelerating reforms that can unlock flexibility, scale storage and modernize the mechanisms that keep the grid balanced.

Against that backdrop, summit panels examined the evolution of national energy policy, the impact of EU‑level flexibility mandates and the technical requirements for integrating storage into a grid increasingly shaped by variable renewables. Speakers framed storage as essential infrastructure for system security, balancing and resilience.

Unlike past editions of the conference, the panelists avoided speculative capacity claims. Poland currently has no official national storage target, though upcoming EU flexibility‑market rules will require the government to assess and plan for its storage needs. The panel discussions primarily centered on whether Poland should prioritize large centralized assets or accelerate distributed deployments, and how flexibility requirements will influence investment decisions.

Market‑mechanism reform emerged as a second major topic of discussion. The panelists dissected grid‑forming capabilities, flexibility products, connection‑cost adjustments and the qualification processes facing aggregators.

Several contributors argued that current reforms still fall short of enabling new entrants, while others pointed to slow permitting and grid‑connection procedures as a bottleneck for the scale of storage Poland will require. Business‑side concerns surfaced as well, with observers noting the dominance of Asian suppliers and warning that cost‑driven procurement could undermine long‑term system stability without stronger design standards and cybersecurity oversight.

On the trade‑show floor, exhibitors reflected a market diversifying across scale and technology. Utility‑scale developers and engineering, procurement and construction (EPC) contractors – including PGE Polska, Greencells, Photon Energy, BayWa re, Statkraft, Northland Power and Axpo – signaled continued momentum behind large PV and hybrid projects.

Battery and storage‑technology suppliers formed another major cluster. LG Energy Solution showcased its focus on upstream manufacturing, while Alpha ESS promoted its modular Storion systems for commercial and industrial (C&I) customers alongside utility‑scale offerings. Inverter and hybrid‑system makers such as BT Storage, Growatt, Fox ESS, Deye and Sigenergy also showcased solutions spanning the residential to C&I segments.

Systems integrators and balance‑of‑system specialists were out in force, with CORAB and SL Rack promoting their mounting‑system engineering solutons, while Wamtechnik and Elsta.pl showcased their expanding roles in battery energy storage system (BESS) integration. Ingeteam and Rawicom rounded out the segment by promoting their control-system know-how through energy management system (EMS) and battery management system (BMS) platforms designed for the increasingly complex demands of hybrid projects.

Smaller players such as Byotta, Volt Power (Soleos), SunSynk and Eenovance brought niche components and integration services to the table. And domestic PV brands were also out in force, with ML System, MarvenSolar.pl, Polak PV, Proton Solar, Paneclaw, Marstek Keno, Volvetia, Grodno, Runergy and Dome Solar showcasing modules, mounting hardware and distribution offerings tailored to Polish installers and EPC contractors.

Across conference rooms and exhibition aisles, the message was consistent: storage is shifting from a promising add‑on to a central pillar of Poland’s energy transition. Regulatory clarity, market access and flexibility compensation remain unfinished business, but even with a smaller footprint, the expo revealed an industry pushing ahead – cautious about policy gaps, confident in long‑term demand, and increasingly aware that the next phase of growth will hinge on how effectively storage is integrated into the national system.

In all ages, humankind decided to spend considerable amounts of the available productivity on special monumental projects. Managing climate change and rebalancing within the planetary boundaries is such an activity. The enormous energetic productivity of solar PV may evolve as the central pillar to create a sustainable civilization.

Since civilizations have existed, monumental projects have been undertaken, such as the Pyramids of Giza, the Great Wall of China, the Gothic cathedrals, or the Apollo programme. Substantial labour and resources were invested in such projects, ranging from 0.5% up to 10% of the available productivity in the respective society, and lasting between a few years and more than a century. Such monumental projects can be grouped into five categories: culture, infrastructure, technology, war and conflict, and disaster response. A recent study from Forschungszentrum Jülich, Helmholtz Institute Erlangen Nürnberg for Renewable Energies and LUT University entitled Marshalling our productivity to create a sustainable global civilization investigated monumental projects and their link to excess productivity.

Since the industrial revolution, unprecedented wealth around the world, along with an enormous increase in life expectancy, reduction of infant mortality, reduction of starvation, freeing people from poverty, and creating unparalleled standards of living for many. These benefits were made possible by an ever-increasing use of fuel. At the same time, excessive fossil fuel consumption has led to various repercussions, in particular environmental destruction and climate change.

Reaching a global net-zero emission energy system can be considered a monumental project. Depending on different sources, such as McKinsey, BNEF, the International Energy Agency, or the United Nations, the required annual expenditures to achieve this goal may lie between 0.7 and 1.3% of the global gross domestic product (GDP) to be allocated for a few decades. Such expenditures are in the range of accepted societal choices in the past, for instance the military spending during the Cold War (3% of GDP of the United States for decades, for example) or the Belt and Road Initiative (an estimated 0.75% of GDP of China).

Solar PV gaining ground in the energy system driven by sustainability

The ongoing global energy transition has various facets, with solar PV at its core reaching over 70% of all newly installed power capacity in the world in the recent past as the fastest ramping energy source since the industrial revolution, and positioning solar PV as a prime energy supply solution around the world. Plummeting costs of solar PV and additional renewable energy technologies, complemented by growing battery storage, form the basis of a comprehensive electrification. Since the mid-1990s, global energy transition studies regularly find the contribution of solar PV to the global energy supply by mid-century to be in the order of about 70%.

The energetic sustainability of solar PV has been improved since the invention of the silicon solar cell. The rate at which solar panels have improved over time has been consistent and high for decades. For example, the energy required to make a solar panel has been reduced by 14% every time installations doubled between the 1970s and the 2010s. This learning has been enabled by continuously rising efficiencies, an increase in technology lifetimes, and a reduction in the use of materials per rated power output, as summarized in a recent publication by international PV experts. The energy payback time for PV systems ranges globally between 0.44 – 1.42 years and in Europe between 0.89 – 1.24 years depending on location. The low payback time also results in a large value for the energy returned on investment – a PV system that is operated for 30 years generates between twenty and seventy times the energy that was needed for its production. The lifetime of PV systems may be further increased up to 50 years in the longer term. System-level studies have shown that the energetic sustainability of solar PV remains robust even when accounting for additional energy investments required for batteries, complementary renewable energy technologies, and curtailment, both at global and regional scales.

Rebalancing withing safe and just planetary boundaries enabled by solar PV

Solar PV may emerge as the key driver for a sustainable civilization. This would mean supplying all humans with all needed energy for the highest standards of living, which is estimated to require 150-200 TW_p of solar PV installations by the end of this century. A comprehensive Solar-to-X Economy across energy sectors will become a major characteristic in many regions around the world. The upper limit of the range of solar PV installations would even include the energy demand for massive carbon dioxide removal activities to rebalance civilization within safe und just planetary boundaries, which equals to about 10 – 12% of global primary energy supply and may cost about 0.4 – 0.7% of the global GDP to return to 1.0℃ with about 350 ppm of atmospheric CO₂ concentration. In this way, PV installations could help in powering carbon dioxide removal to avoid global GDP loss of about 8% if the unintended consequences of our productivity are not addressed. Reaching permanent climate safety and its respective investments can be regarded as a highly profitable venture of civilization in the row of monumental projects in history. The high energetic productivity of solar PV is a major driver to reach a sustainable civilization.

Authors: Christian Breyer, Ian Marius Peters, and Dominik Keiner

This article is part of a monthly column by LUT University.

Research at LUT University encompasses various analyses related to power, heat, transport, desalination, industry, and negative CO₂ emission options. Power-to-X research is a core topic at the university, integrated into the focus areas of Planetary Resources, Business and Society, Digital Revolution, and Energy Transition. Solar energy plays a key role in all research aspects.

Conceived for stationary energy storage, the proposed sodium-ion battery configuration relies on an P2-type cathode material and an hard carbon anode material that reportedly ensure full-cell performance. Electrochemical testing revealed initial capacities of 200 mAh/g for the cathode and 360 mAh/g for the anode with capacity retentions of 42% and 67.4% after 100 cycles.

An international research team has designed a sodium-ion battery (SIB) storage system based on a P2-type cathode material known as Na0.67Mn0.33Ni0.33Fe0.33O2 and an anode relying on a hard carbon material fabricated from lavender flowers.

The proposed system configuration is intended for low-cost fabrication while ensuring scalability and environmental sustainability, as the two electrode materials are described as “widely accessible” precursors.

“Plant diversity and production capacity are important factors affecting the commercialization of SIBs, as plant-derived hard carbons s are both sustainable and economical,” the researchers explained. “Hard carbon derived from plants preserves the microstructures of the plant tissues, thereby enhancing the penetration of the electrolyte and sodium diffusivity.

The scientists estimated global lavender production at approximately 1,000–1,500 tons annually. However, only a small fraction of this production can be used for electrode materials, as only the flower residue is suitable for conversion into hard carbon.

They also noted that the hard carbon anode and P2-type cathode in the full cell have insufficient sodium reservoirs, leading to poor electrochemical performance. “The present work addresses this gap by evaluating the full-cell performance of P2-Na_0.67Mn_0.9Ni_0.1O₂ coupled with lavender flower waste-derived hard carbon under different presodiation approaches,” they further explained.

The scientists used X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy to characterized the SIB system's cathode and anode and found the cathode has an hexagonal P63/mmc structure, while the anode showed characteristic broad peaks of amorphous carbon.

SEM and TEM revealed, in particular, micrometer-sized cathode grains and a porous hard carbon surface, with EDS and XPS indicated the material has good structural stability. Further analysis also demonstrated that nickel (Ni) incorporation improved the cathode’s structural, electronic, and electrochemical performance.

Moreover, electrochemical testing revealed initial capacities of 200 mAh/g for the cathode and 360 mAh/g for the anode with capacity retentions of 42% and 67.4% after 100 cycles. Overall, Ni doping was found to improve the cathode’s conductivity and stability, and the anode demonstrated good sodium storage performance, supporting strong half-cell and potential full-cell performance, according to the researchers.

“This comprehensive study highlights the potential for developing SIBs with low-cost and sustainable electrode materials,” they concluded. “The optimization of presodiation strategies offers an opportunity for advanced commercial and scalable SIB technologies.”

The system was described in the study “Cost-effective sodium-ion batteries using a Na_0.67Mn_0.9Ni_0.1O₂ cathode and lavender-flower-waste-derived hard carbon with a comparative presodiation approach,” published in the Journal of Power Sources. The research team comprised scientists from Turkey's Inonu University, Istanbul Technical University, Malatya Turgut Ozal University and Aksaray University, as well as from Korea Institute of Science and Technology and Pakistan's Quaid-i-Azam University, among others. 

Elon Musk told the World Economic Forum in Davos that the lowest-cost energy for AI could come from solar power generated in space. He also suggested that sparsely populated areas of Spain and Sicily could serve as Europe’s “power plants.”

“We are in the most interesting era in history.” This is how Elon Musk opened his remarks at the World Economic Forum in Davos, speaking with BlackRock Chairman and CEO Larry Fink.

Musk highlighted the potential of solar and battery storage in the United States. “Solar energy and batteries alone could supply half of the energy consumed in the US annually, requiring a negligible amount of space,” he said. “The same can be done in Europe: sparsely populated areas of Spain and Sicily could generate the electricty Europe needs.”

He noted that high tariffs complicate such plans in the United States. “SpaceX and Tesla are going to produce 100 GW per year at our plant in three years. I encourage others to do the same,” Musk said. “Despite the tariffs, China produces solar cells at a very low cost.”

Musk also noted that Tesla has begun using Optimus humanoid robots for basic factory tasks, expects them to handle more complex functions by 2026, and plans to make them available to the public in 2027.

“I believe the decisive factor for the deployment of AI is energy,” he said. “AI production is growing exponentially, but electricity is only growing by 4% per year. In 2026, we are going to produce more chips than we can power.”

He added that China is increasing energy generation to meet demand, largely through solar energy.

Looking further ahead, Musk suggested that the lowest-cost energy for AI could come from space. The plan is to transmit solar energy generated in space to Earth, a goal he expects to achieve within two to three years.

He closed on a hopeful note: “I want to encourage everyone to be optimistic and have hope for the future. You lead a better life if you are optimistic and your predictions don't come true, than if you are pessimistic and they do.”

Wood Mackenzie highlights a groundbreaking 5.2 GW solar-plus-storage project in the UAE capable of delivering 1 GW of continuous baseload power, signaling a potential shift in renewable energy deployment despite high costs. The report also forecasts strong global solar growth through 2030, including the rise of residential “balcony solar” in the U.S. and expanded solar shares in Asia Pacific and the U.S.

Wood Mackenzie has said it that a massive solar-plus-storage project currently under construction in the UAE will “redefine baseload power.”

The prediction is one of three Wood Mackenzie has published as part of its “Global solar: Key things to look for in 2026” report.

The 5.2 GW solar plus 19 GWh battery energy storage project, under development by Masdar and Emirates Water and Electricity Company (EWEC), which broke ground in October, is the world’s first first gigawatt-scale renewable project engineered to deliver 1 GW of continuous, around-the-clock baseload power.

Michelle Davis, global head of solar for Wood Mackenzie, said the project represents a structural shift in hybrid project development in the region.

Davis noted that while the project is currently too expensive to replicate broadly, at roughly six times the cost of a new gas-fired combined-cycle gas turbine plant, successful project execution and continued cost declines could redefine baseload power.

“Despite the challenging events of 2025, solar market fundamentals and demand will remain strong in 2026, especially as the global economy continues to electrify,” Davis concluded.

The report also forecasts solar to play a major role in meeting the electricity load growth anticipated over the next decade in several regions of the globe.

Annual solar generation, including distributed solar, is expected to grow by 232 GWh, of 65%, in the U.S. between 2026 and 2030, according to Wood Mackenzie’s analysis. This will bring solar closer to gas, which makes up the largest share of electricity generation in the U.S., which is expected to grow by 340 GWh, or 21%, over the next four years.

In the Asia Pacific, solar made up 11% of the power generation mix in 2025 and is forecast to grow to 17% by 2030. Wood Mackenzie expects solar, wind and storage to make up a third of the power generation mix in the region by the end of the decade, having accounted for less than 10% in 2020. The analysis say new power capacity in the region is overwhelmingly directed towards solar due to price competitiveness.

Wood Mackenzie’s final prediction for 2026 is that balcony solar, or plug-in-solar, will begin to take a foothold in the US this year, while continuing its market penetration in Europe.

The market research company explains that prior to early 2025, there was no market for balcony solar in the U.S.. Utah became the first state to enable residential customers to utilize portable solar generation devices that produce up to 1.2 kW of power without the need for a utility interconnection agreement last March, with more than a dozen states introducing similar legislation since.

Wood Mackenzie expects this number to continue growing but also warned that key challenges lie in fragmented electrical standards, lower voltage in U.S. homes, and a larger share of single-family homes without balconies.

A research team from Osaka Metropolitan University have developed a donor-acceptor-donor molecule that can spontaneously self-assemble into nanoscale structures and offer a more stable route to built-in p/n heterojunctions in organic solar cells.

Scientists from Osaka Metropolitan University have developed a molecular architecture offering a new design strategy toward producing more efficient organic thin-film solar cells.

Their donor-acceptor-donor (DAD) molecule, known as TISQ, integrates a squaraine-based p-type segment and a naphthalene diimide n-type segment within a single molecule. It is capable of naturally forming p/n junctions, otherwise known as the interface between p-type and n-type semiconductors.

The two segments link via amide groups that promote hydrogen bonding, meaning TISQ can spontaneously self-assemble into distinct nanoscale structures, which the scientists believe could offer a more stable route to built-in p/n heterojunctions.

Takeshi Maeda, Associate Professor at the university's Graduate School of Engineering and lead author of the study, explained that depending on the solvent, TISQ can spontaneously organize into nanoparticle-like J-type or nanofiber-like H-type aggregates.

The university’s news release explains polar solvents cause TISQ to form nanoparticle-like J-type aggregates through a cooperative nucleation–elongation process, while low-polarity solvents see it assemble into fibrous H-type aggregates via an isodesmic mechanism. “Both show different electronic behaviors, especially in how efficiently they transport charges when light hits them,” Maeda said.

The team’s research fabricated organic thin-film solar cells incorporating TISQ as a single-component photoactive material in a test of device applicability. The molecule was shown to form nanoscale p/n heterojunctions through self-assembly, which the scientists say highlights the feasibility of molecular designs that autonomously organize into functional electronic structures.

With the power conversion efficiency of the fabricated cells remaining low, the team acknowledged further research is required before it is practically applied. Nevertheless, they concluded that their findings demonstrate how differences in self-assembled nanoscale p/n heterojunction structures directly influence the photocurrent response in a single-component system.

“Our focus is on developing molecular design strategies that use self-assembly to connect nanoscale p/n heterojunction structures with photoelectronic responses in single-component organic systems,” Maeda said. “By deepening this structure–function understanding, we aim to broaden the design space of organic thin-film solar cells and related optoelectronic materials.”

The new molecule is described in the research paper “Solvent-Controlled Supramolecular Polymerization and Morphology-Depended Photoconductivity Modulation in a Squaraine-Naphthalene Diimide-Squaraine Bulk p/n Heterojunction,” available in the journal Angewandte Chemie International Edition.